Project desk: +1 800 288 6000 · [email protected]Specification support · North America

Lighting practice

A $3,200 Chandelier Order Taught Me Why 'One-Stop' Lighting Suppliers Are a Lie

2026-10-23 · Keiko Mori

I don't trust a lighting supplier who says they can do every kind of fixture. We're a lighting company — and I've seen the inside of that lie because I used to be the guy saying yes to everything. One indoor chandelier order I should've never touched cost us $3,200 and a repeat client. Now the first line of our internal checklist is blunt: if it's outside architectural outdoor lighting, the answer is no.

The $3,200 chandelier mistake

In September 2022 we quoted a boutique hotel terrace. The fixture list was clean — stacked step lights, bollard lights for the path, wall luminaires, a DMX-capable LED driver. The architect slipped in one extra line in the email: 'Could you also handle the lobby chandelier while you're at it?' I said yes. That was the mistake.

The chandelier quote was around $3,200 — no, $3,180, I pulled the invoice this morning and it's still in the system. We subbed it to a decorative indoor supplier, approved a glass-and-brass design from their catalog, and moved it into our production schedule as if it were just another line item. (Should mention: the mounting stem was custom, which we didn't fully check until much later. That became the root of everything that went wrong.)

Installation week. The chandelier shows up, looks fine on the pallet. The electrician mounts it, and the stem specification doesn't match the structural engineer's drop requirement — off by roughly 40 mm. On a hotel lobby ceiling, 40 mm is a full redo. We shipped the fixture back, re-ordered the stem, and lost three weeks. That cost us $890 in expedited freight and labor, but the real number is larger: the architect pulled the rest of the project — a $19,000 outdoor scope — because in their words, 'if they can't get a chandelier right, what else are they guessing at?'

All of that from one word I should have never said.

'Full-service lighting' usually means 'we do enough of everything to be mediocre at most of it'

This was genuinely useful advice ten years ago, back when supply chains were fragmented and a single purchase order across five vendors was a nightmare. Today, the same product catalogs are digital, freight is standardized, and a small specialist can compete with a full-line supplier on quality and often win. The 'one-stop' argument isn't as strong as it used to be.

So when a supplier tells me they do chandelier lighting, smart lighting, bollard lighting, and LED strip cutting all under one roof, my first thought isn't 'impressive catalog.' It's 'which of those are you actually good at, and which of those are you faking?'

You can spot the difference fast. A focused outdoor supplier won't stumble when you ask about ingress protection — outdoor bollards and wall luminaires are typically expected to meet IP65 or IP66 under IEC 60529, and a specialist knows that by reflex. A full-service supplier usually has to 'check with the team.' That pause tells you everything.

What we actually do — and where we stop

We're not neutral about this. Our company's strength is architectural outdoor lighting: bollard lights, path and step lights, wall luminaires, landscape spotlights, downlights, and the LED drivers that run them. That's the BEGA lane, and we've stayed in it because staying in it is why the fixtures perform.

But let me be specific, because 'boundary' shouldn't be a vague disclaimer — it should be a list:

  • Smart lighting — we handle drivers, dimming protocols (0-10V, DALI, DMX), and the smart-lighting features that live inside the fixture. What we don't do is a full building-wide IoT lighting platform with network provisioning, energy analytics, and BMS integration. That's a controls specialist's job, and the project is better when they own it and we supply the luminaires. I'm not a lighting-controls engineer — I'm the person who ships the fixture — so I can't tell you which platform to deploy. I can tell you which drivers your platform will play nicely with.
  • Cutting LED strip — yes, most of our constant-voltage strip (12V or 24V) can be cut on the marked lines, typically every three LEDs, roughly 50 mm apart depending on the product. Constant-current strip usually can't be field-cut. But I never answer 'can you cut led strip' with a flat yes — I ask where it's going first. If the application is a tight outdoor profile, a factory-cut length is often the safer call. That question has saved more orders than it's cost.
  • Chandelier lighting — we don't do it. Decorative indoor lighting is a different discipline with different tolerance for weight, heat, and visual balance. When a project needs it, I hand it to a peer who does it right. That's not polite deflection; it's the honest answer.

'But coordinating multiple vendors takes more time'

Fair pushback. I hear it. Here's my honest response: one extra vendor conversation is cheaper than a single install-week scramble, and unlike the scramble, the extra conversation can be planned for.

Budget a coordinator's time. Build in a handoff window. Then let the specialist own the piece they actually specialize in, because they've already made the mistakes you're about to make on that product. The chandelier failure wasn't because chandeliers are hard — it was because we tried to absorb an indoor product through an outdoor workflow and a customized mounting spec got missed in the handoff. We paid to learn that.

There's a strange satisfaction in telling a customer 'that part isn't us — here's who does it better.' The first time, it feels like giving away business. The second time, they call you back for the part you are good at. That's the payoff.

Back to the chandelier

Our checklist line is simple: if the fixture isn't architectural outdoor, refer it out. That referral goes to an indoor decorative specialist, a lighting-controls integrator, or the architect's own team — whoever owns the decision.

My experience is based on around eight years of outdoor project orders — roughly 400 fixtures worth of terrace, path, and facade work. If you're building a residential or a fully indoor spec, that sample size doesn't apply to you, and you should weight my advice accordingly. But one thing I'm confident holds across every project type: the supplier who can tell you clearly where their expertise ends is usually the one whose expertise is real.

Twenty years of BEGA outdoor lighting has taught us which fixtures we can build in our sleep — bollards, path lights, wall luminaires, landscape spots, step lights, and the drivers behind them. Chandeliers are not on that list. Hire the specialist who does them. Your project will thank you, and so will your install week.